首頁

公司新聞

可以將木屑顆粒機燃燒的分為四個階段

來源:admin 發布時間:2016-08-24 18:02 瀏覽次數:
使用木屑顆粒劑的好處,好多客戶都不明白,今天AG8就說說。
The benefits of using wood chips granules, a lot of customers don't understand, we will talk about today.
木屑顆粒機之所以能在使用的時候,能達到很好的效果,是因為它的內部有著很多個係統相配合的原因,那麽對於木屑顆粒機來說,它內部有著自己的喂料係統,對於它在這方麵的係統來說,它自己對於自己也是有著一定的要求的,首先是它要達到自己在喂料方便的表現。
Sawdust pellet machine can use, can achieve very good effect, because it has a number of internal coordinates system, then for sawdust particles machine, it has its own internal feeding system, for it in this system, it for themselves also have certain requirements, first of all is it convenient to their feed.
很多人都知道木屑顆粒機在常溫條件下利用各種原料進行擠壓而製成的。原料的密度一般為 140kg/m左右,成型後的顆粒密度大於1200kg/m ,木屑顆粒中含有纖維素、半纖維素、木質素等。由於結構比較疏鬆,密度小,當受到外力後,原料將經曆重新排列位置、彈性變形、機械變形、塑性變形階段。
Many people know that the wood pellet machine at room temperature under the conditions of using various raw materials made by extruding. Raw material of the density of 140 kg/m or so commonly, after forming the grain density of more than 1200 kg/m, sawdust particles containing cellulose, hemicellulose, and lignin, etc. Because structure is loose, density is small, after the impact, the raw material will rearrange the locations, the elastic deformation, mechanical deformation and plastic deformation stage.
可以將木屑顆粒機燃燒的分為四個階段。
Burning of wood particles machine can be divided into four stages.
第一階段是將生物質原料的脫水過程,失重在10%
The first stage is the dehydration process of biomass, weightlessness in 10%
第二階段這一階段是生物質揮發分和碳的燃燒過程,揮發分和碳的燃燒分別集中在450℃和495℃。失重應該控製在85%
The second stage of this phase is biomass combustion of volatile matter and carbon, combustion of volatile matter and carbon concentration at 450 ℃ and 495 ℃ respectively. Weight loss should be controlled in 85%
第三階段這一階段是無機物的晶體轉變過程。同一化學組成的物質有事具有不同的晶型,一定範圍內自由焓量低的晶體最穩定。質量不變。
The third phase of this phase is inorganic crystal transformation process. Material of the same chemical composition is occupied with different crystal type, low enthalpy amount within a certain range of crystal is the most stable. The same quality.
第四階段是木屑顆粒機的成形階段。
The fourth stage is the forming stage of the sawdust pellet machine.
AG8公司的AG8能將木屑顆粒機成料率達到90%以上,可能您估計不太會相信,但AG8歡迎廣大客戶來我廠視察檢驗!!
Our company's products can be sawdust particles machine ChengLiao rate above 90%, can you estimate is unlikely to believe that, but we welcome all customers to visit our factory inspection!!

上一篇:生物質顆粒機燃料成型原理

下一篇:如何判斷木屑顆粒機模具的質量

相關AG8

更多>>